Conductive Films

Conversion Calculator

Blueridge Film's volume conductive films meet electrical requirements of MIL-P-82646A It is made from a single layer of carbon-loaded polyethylene. Conductivity does not depend on humidity. It is non-sloughing, does not contaminate components it comes in contact with despite repeated use, and is groundable.

VOLUME CONDUCTIVE FILM HUMIDITY INDEPENDENT TUBULAR PROTECTION
Properties
Color - Black Opaque - Printable
Tensile Strength - >2000  PSI	ASTM D   882
Elongation (MD%) - >150%	ASTM D   882
Dart Impact - 250 to 700 gms	ASTM D 1709
Tearing Strength - >400 lbs. per inch	ASTM D   882
Burst (Mullen) - 20 to 60 PSI	ASTM D   774
Performance
Volume Resistivity - <30,000 OHMS/cm	ASTM D 991
Surface Resistivity - <30,000 OHMS/Sq.	ASTM D 257
Sizes
As specified by customer.
Heat Sealing
Product is suitable for automatic bag-making machines:      Temperature - 250ºF - 375ºF      Time - 0.5 - 3.5 seconds      Pressure - 30 - 70 PSI<
Applications
For packaging of static sensitive components, where electrostatic contamination is a problem. For packaging of chemical and powder explosives. Products Available - Bags, Tubing, Sheeting.

*The values in the above table were developed from random samples taken from production material of conductive film that we believe to be typical for the product. Actual values, however, may vary somewhat from those depicted here and BFI makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. Customers should determine product suitability based upon their own initial criteria. Nothing herein is to be taken as license to operate under or a recommendation to infringe upon any patent.