Properties | Units | ASTM Method | Typical Values |
---|---|---|---|
Resin Properties: | |||
Melt Index | g/10 min | D 1238 | 6.8 |
Density | g/cm3 | D 1505 | 0.936 |
Following properties are based on Compression molded samples; no film specifications are available. | |||
Tensile Strength @ Yield | psi | D 638 Type IV 50 mm/min |
2500 |
Thermal | |||
Vicant Softening Temperature | º F | D 1525 | 234 |
Peak Melting Temperature | º F |
D 3418 | 261 |
Flexural Modulus |
|||
1 % Secant Modulus | psi | D 790B | 110,000 |
2 % Secant Modulus |
psi | D 790B | 93,000 |
Environmental Stress-Crack Resistance | |||
10% lgepal, F50 | hr | D 1693B | 240 |
NOTE: Data developed under Laboratory conditions and are not to be used as specification, maxima or minima. ASTM procedures (where applicable) were used for these tests. The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere. The use of these products must be guided by the user's own methods of selection of proper formulation. BFI disclaims any responsibility for misuse or misapplication of its products. BFI MAKES NO WARRANTY OF MERCHANTABILITY AND THERE IS NO WARRANTY THAT GOODS SUPPLIED SHALL BE FIT FOR ANY PARTICULAR PURPOSE. BFI's liability and customer's exclusive remedy for any claims arising out of sales of its products are expressly limited at customer option to replacement of nonconforming goods only.
Mailing Address:
P.O. Box 1600
Petersburg, VA 23805-0600
Physical Address:
10921 Lamore Drive
Disputanta, VA 23842-4602
Toll Free: 888-706-4600
Tel: 804-862-8700
Fax: 804-862-5100
E-mail: sales@blueridgefilms.com
Mailing Address:
P.O. Box 1600
Petersburg, VA 23805-0600
Physical Address:
10921 Lamore Drive
Disputanta, VA 23842-4602
Toll Free: 888-706-4600
Tel: 804-862-8700
Fax: 804-862-5100