WVTR & OTR for various plastic films
The following OTRs are bulk material properties displayed at 1 mil. You may divide by the gauge (in mil) in order to approximate OTR at a different thickness.
The following OTRs are bulk material properties displayed at 1 mil. You may divide by the gauge (in mil) in order to approximate OTR at a different thickness.
Blueridge Films can Corona Treat (upon request) on Low Density, High Density, Metallocene (mPE) and Polypropylene plastic films. We can treat one side or both sides depending on which extrusion process is used.
Blueridge Films Easy Tear plastic film for easy and quick tearing with minimum effort.
BFI is a manufacturer of a specialty product called Stripes. These are made with High Density Polyethylene (HDPE) in various colors, typically 4” or 2” wide.
Cast multi layer Co-Extruded .004" LDPE with .0005" thick 25% EVA layer Film, complying to FDA guideline for meat packing Vacuum Formed trays.
BFI is now capable of producing Coextruded Cast films up to three layers.
Mailing Address:
P.O. Box 1600
Petersburg, VA 23805-0600
Physical Address:
10921 Lamore Drive
Disputanta, VA 23842-4602
Toll Free: 888-706-4600
Tel: 804-862-8700
Fax: 804-862-5100
E-mail: sales@blueridgefilms.com
Mailing Address:
P.O. Box 1600
Petersburg, VA 23805-0600
Physical Address:
10921 Lamore Drive
Disputanta, VA 23842-4602
Toll Free: 888-706-4600
Tel: 804-862-8700
Fax: 804-862-5100