High Molecular Weight High Density Film Properties
Typical Properties of BFI 2287 HMW-HDPE film
Information
provided is solely for your consideration and verification and
is not to be constructed as a warranty for which BFI assumes no
legal responsibility. Film was produced at 0.8 mil with 4:1 BUR
|
Properties |
Units |
ASTM# |
Typical1 |
|
Melt Index, 190o C, 5Kg |
g/10 min |
D1238 |
0.31 |
|
Flow Rate, 190/21.6kg |
g/10 min |
D1238 |
10 |
|
Density |
g/cm3 |
D-792 |
0.95 |
|
Melting Point |
o F |
D-3417 |
260 |
|
Dart Impact |
g |
D1709,A |
350 |
|
Tensile Strength @ Yield |
|||
|
MD |
psi |
D882 A, 20in/min |
5300 |
|
TD |
psi |
D882 A, 20in/min |
5000 |
|
Tensile Strength @ Break |
|||
|
MD |
% |
D882 A, 20in/min |
9200 |
|
TD |
% |
D882 A, 20in/min |
9800 |
|
Elongation @Break |
|||
|
MD |
% |
D882 A, 20in/min |
300-500 |
|
TD |
% |
D882 A, 20in/min |
300-500 |
|
Water Vapor Transmission @100 o F |
g/24 hr/m2/mil g/24 hr/100 in2/mil |
E 96/66 E 96/66 |
12.5 0.8 |
1 The information provided is solely for your consideration and verification and not to be construed as a warranty for which BFI assumes no legal responsibility. Buyers and users must determine the results to be obtained for the application of the information herein and safety and the suitability of our products for their own purposes and assumes all risk, responsibility and liability for all injuries, losses or damages arising from the application of the information herein or use of our products.
