Blueridge Film’s volume conductive film meets electrical requirements of MIL-P-82646A It is made from a single layer of carbon-loaded polyethylene. Conductivity does not depend on humidity.  It is non-sloughing, does not contaminate components it comes in contact with despite repeated use, and is groundable.

VOLUME CONDUCTIVE FILM
HUMIDITY INDEPENDENT TUBULAR PROTECTION

Properties

Performance

Surface Resistivity - <30,000 OHMS/Sq.

ASTM D 991

ASTM D 257

Sizes

As specified by customer.

Heat Sealing

Product is suitable for automatic bag-making machines:
     Temperature - 250ºF - 375ºF
     Time - 0.5 - 3.5 seconds
     Pressure - 30 - 70 PSI

Applications

For packaging of static sensitive components, where electrostatic contamination is a problem.

For packaging of chemical and powder explosives.

Products Available - Bags, Tubing, Sheeting.

*The values in the above table were developed from random samples taken from production material we believe to be typical for the product.  Actual values, however, may vary somewhat from those depicted here and BFI makes no warranty, expressed or implied, as to the suitability of these materials for any specific use.  Customers should determine product suitability based upon their own initial criteria.  Nothing herein is to be taken as license to operate under or a recommendation to infringe upon any patent.

 

Blueridge Films, Inc. 20307 Unico Rd. P.O. Box 417 McKenney, VA 23872-0417

Toll Free: 888-706-4600 Tel: 804-478-4600 Fax: 804-478-5757 E-mail BFI: sales@blueridgefilms.com